Reef Central Online Community
Live Aquaria

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Blogs > Aqua Digital Blog for all things we distribute
Register Blogs FAQ Calendar Mark Forums Read

Notices

  1. Old Comment
    AQD_ottawa's Avatar

    Fauna Marin Something For Everyones System

    Fish and Coral Food continued -

    Ultra Sea Fan

    This is the main ingredient in Fauna marins amazing Dendro system, developed over many years of research fauna marins system now makes it possible to keep these important species alive and more importantly growing with great health

    The system incorporates Ultr Clam and Ulta Min-D, the ultra Min-D can be replaced with ultra pac which is an artificial coral mucus that is preffered by some more advanced keepers.

    http://www.faunamarindirect.com/fauna-dendro-system.php

    Ultra Min-F

    This is a very important fod source for songes and gorgonias, again as with all Fauna marin products, developed in their own coral systems and is now widely respected in Europe as the leading food for these species.

    Ultra Min-F is to be used in conjunction with other FM products for best results

    http://www.faunamarindirect.com/faun...nia-system.php

    Add Ultra Sea Fan to the ingredient mix if you have multi species systems.
    Posted 02/12/2010 at 09:18 AM by AQD_ottawa AQD_ottawa is offline
  2. Old Comment
    AQD_ottawa's Avatar

    Project cube is here

    With fine precision the Aquarium cabinet starts to take shape. Just look at the craftsmanship! I cant wait to see this in the flesh.





    Posted 02/11/2010 at 04:29 PM by AQD_ottawa AQD_ottawa is offline
  3. Old Comment
    AQD_ottawa's Avatar

    Project cube is here

    So a hot topic has come up in email and PM,

    "How are you going to get round high levels of PPM from your RO unit on initial outflow when switched on?"

    Good question as this is everyones concern with direct RO input and leads most to install holding tanks

    Not required though

    All you need is a Tee piece on your outlet from the RO and 2 x RO electronic solenoids. One solenoid goes to waste to run off for a set timed amount of RO.

    of course if you do not trust the auto shut off valve on your RO unit then you will need a solenoid on the inlet also.

    After this timed period ends the solenoid supplying flow to the ATO for the tank comes on supplying only clean water to the tank.

    So using a bit of GHL profiLux progammable logic utilising the extreme power of Profilux you rid yourself of the holding tank for good
    Posted 02/10/2010 at 07:41 AM by AQD_ottawa AQD_ottawa is offline
  4. Old Comment
    AQD_ottawa's Avatar

    Project cube is here

    So equipment break down.

    1 x Miracle star fire Euro braced tank
    1 x BWi 5 stage RO
    3 x RO electronic solenoids
    1 x ProfiLux 3EX
    1 x wireless bridge adapter (network is upstairs, tank downstairs so need a link to the controller)
    1 x PAB power bar
    1 x GHL pH probe
    1 x GHL Redox probe
    1 x GHL Salinity probe
    1 x GHL Humidity/Air temp Probe (this is for the house)
    1 x Aqua Digital ozone unit (max on two hours after feeding)
    1 x 4 channel GHL slave doser
    1 x BM150Pro bubble Magus Skimmer
    2 x Tunze 6055 streams
    2 x Tunze - GHL control cables
    2 x GHL optical level sensors for ATO and AWC
    2 x Aquarium Illuminations LED lighting
    1 x Ai-GHL control cable
    3 x Bubble Magus Balling chambers
    1 x Acrylic sump
    1 x Aqua Bee 2000L return pump
    ? x Various amounts of Lockline for the return
    1 x Durso stand pipe
    1 x Phos/Carbon reactor

    I am sure there will be more but that covers the basics.
    Posted 02/10/2010 at 07:10 AM by AQD_ottawa AQD_ottawa is offline
  5. Old Comment
    AQD_ottawa's Avatar

    Project cube is here

    So here are the first pictures of the stand



    Posted 02/08/2010 at 07:43 PM by AQD_ottawa AQD_ottawa is offline
  6. Old Comment
    AQD_ottawa's Avatar

    Project cube is here

    Where it comes out



    And the feedline waiting to be extended to the first floor



    For the ATO I will most likely use two solenoid valves, one will be for redundancy. The ATO will be controlled by the ProfiLux as will the AWC.
    Posted 02/08/2010 at 05:54 PM by AQD_ottawa AQD_ottawa is offline
  7. Old Comment
    AQD_ottawa's Avatar

    Project cube is here

    So onto the set up and some photos (the important part)

    So my wife loses one of her side tables in favour of the tank, I am sure I can find room elsewhere for her belly dancing photos!



    The first thing that arrived was the 5 stage RO unit from BWi plumbing.

    Here is the spec

    Membrane - watts
    5 stage RO/DI
    Stage 1- 1 Micron Sediment NSF certified
    Stage 2- Catalytic Carbon for Hydrogen Sulfide and Chloramines Removal 12 x 40 mesh size
    Stage 3-0.5 Carbon Block Cartridge for Long Life and High Chlorine Reduction 20,000Gal Capacity NSF certified
    Stage 4- 100 GPD Membrane TFC 96%-99.5% rejection rates max PSI 125
    Stage 5- Nuclear Grade Mixed Bed DI Resin Cartridge for Demineralization flow 1GPM

    The set up was easy. First thing was to take a tee off the homes humidifier



    This saved the need for a seperate tap, although a shut off has been put inline to the unit.

    The RO unit was securely mounted near the furnace so i could utilise the basement furnace drain for waste.



    The RO will be used for direct auto top off as well as filling the auto water change container, so a line had to be run to the front of the house. At this point the decision came whether to put a pipework duct in the dry wall down to the basement, but then i realised the there was a air return by the side of the tank which was perfect for running the pipework for the ATO and the AWC.

    Here you can see the duct boot I will be going through

    Posted 02/08/2010 at 05:53 PM by AQD_ottawa AQD_ottawa is offline
  8. Old Comment
    Posted 12/11/2009 at 10:01 AM by AQD_ottawa AQD_ottawa is offline
  9. Old Comment

    Profux 3 installation instructions

    Michael,
    I am looking forward to get my kit..Any idean when?


    mike
    Posted 12/11/2009 at 09:57 AM by MSHUR MSHUR is offline

All times are GMT -6. The time now is 07:06 PM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2021 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.