View Single Post
Old 03/01/2011, 12:54 AM   #8
Registered Member
tonyf's Avatar
Join Date: Apr 2005
Location: Brisbane, Australia
Posts: 524
Originally Posted by boboxx View Post
So your saying that your bridge is already configured and working?

Then it's just LOg into the main router and create a lease reservation. (connect to the P3 via USB to find the mac address, it is located under System>LAN). Then it's just a mather of pluging the networcable from then bridge router to the P3. Power the P3 and the lease will be assign to the Profilux.

In PLC do a new connection and enter the IP that you used for the lease reservation.
Thanks Boboxx, much appreciated.

These are my Principles ... If you don't like them, I have others -- Graucho Marx

Current Tank Info: 500 gal reef
tonyf is offline   Reply With Quote