View Single Post
Old 01/08/2016, 11:32 AM   #65
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Posts: 14,121
Quote:
Originally Posted by vikz View Post
Hi guys

Skimmer has been set and ran now for 4/5days.

Its running at 30w and pipe open 4 lines.

I have video showing the skimmer so far. If you guys could watch and let me know your opinion.

Heres a link.
https://youtu.be/9MOODPzhKO0

Thanks
That doesn't look bad at all. Normally I would suggest starting at about 27 watts with this skimmer but since it's a bit oversized for your setup, I'd say you are doing pretty well where you are.

Give it a few more days as it's not yet completely broken in. Once it's broken in, you could try slowing the pump down a bit in 1 watt increments. That will increase the contact time which will darken the skimmate up. It will also slow the skim production down. If you do slow the pump down, drain the collection cup so you can see the results. You will have to find a balance between darker skimmate and consistency. Should you decide to slow the pump down, give it several hours to settle in or 24 hours to see what it produces. You will likely need to close the wedge pipe a bit to maintain consistency.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is offline   Reply With Quote