180 mini

[Andrew]

If I’m looking to replace an airline hose on my 180 is this the correct one ? silicon-tubes 38x5mm per 1/2 meter

[slief]

Originally Posted by Andrew

If I’m looking to replace an airline hose on my 180 is this the correct one ? silicon-tubes 38x5mm per 1/2 meter

It’s the 9x3mm.
https://royalexclusiv.com/Spare-Part...eter::270.html

[Andrew]

Thank you!

[Andrew]

Another question. The collection cup of my skimmer has a black cone. Which version is this

[slief]

Originally Posted by Andrew

Another question. The collection cup of my skimmer has a black cone. Which version is this

Does your pump have the AKB? The AKB is the anti-lime bypass which is a red tube that goes between the pump head and the back of the block. If not and the pump head is black, then you have a Mini Bubble King 180. If not and the pump head is white then you have the VS09. If it does have the AKB then you’d have the VS12.

[Andrew]

No red line. Pump says mini-bubble king 1000.

[slief]

Originally Posted by Andrew

No red line. Pump says mini-bubble king 1000.

Sounds like a VS09 as that had the 800 motor block but the blocks are the same where as the volute and impeller was the difference between the two pump. So like I said, if it’s the black plastic pump head/cover, it’s a VS07 and if it has the white pump head/cover on the front of the pump then it’s a VS09. The first image shows the pump from the VS07 and the 2nd one is the VS09.